§ 67-22. Measurement of sign area.

(a)

Size generally. The areas of a sign shall be computed as the area within the smallest continuous polygon comprised of not more than eight straight lines enclosing the limits of a sign face, together with any sign face cabinet or frame or material, texture, or color forming an integral part of the sign face used to differentiate the sign face from the structure upon which it is placed. If polygons established around wall signs located on the same street oriented wall are within 24 inches or less of one another, then the area of the sign shall be measured within one continuous polygon.

(b)

Structure. The computation of the area of a sign face shall not include the structure, supports, or uprights on which the sign face is placed or any portions of a sign structure that are not intended to contain any message or idea and are purely structural or decorative in nature, other than those parts contained within the polygon that delimits the sign face.

(c)

Electronic sign/changeable copy sign. For any signs on which the words, letters, figures, symbols, logos, fixtures, colors, or other design elements routinely change or are intended to be changed from time to time, the sign face area shall include the entire area within which any words, letters, figures, symbols, logos, fixtures, colors, or other design elements may be placed, together with any frame or material, texture or coloring forming an integral part of the sign face or used to differentiate the sign face from the structure upon which it is placed. Such changeable copy signs cannot flash, and if located within 150 feet of a road right-of-way, may not change more than one time per 20 seconds. The changeable copy portion of an allowed sign shall not exceed 75 percent of the overall sign area. Changeable copy displays shall remain constant in lighting, color, and all other changeable variables allowed by technology.

(d)

Multi-faced signs. For multi-faced signs, when the sign face surfaces are back to back, or where the interior angle formed by the faces is 45 degrees or less, the area of the sign shall be taken as the areas on the largest side. For all other multi-faced signs, the area of the sign shall be the total area on all sides that can be viewed at one time from any angle.

(Res. No. 17-37, § 4 (Exh. A), 11-14-2017)